Neutrino 10-Inch 1U Rack Mount with 4 Keystones, compatible with UniFi Flex Mini and Flex Mini 2.5G

Turn a Flex Mini into a tidy 1U patch point. This 10-inch rack mount for UniFi Flex Mini or Flex Mini 2.5G holds the switch on raised rails with all five ports facing out the front, and adds four keystone ports beside it. Each version is designed around the published dimensions of one switch, so pick the one that matches yours.

• Made for your switch: 1.25 mm clearance per side, support rails under both sides so it sits flat without rocking, and front stop lips so the switch can't slide out of the front. The power light and every port stay in view.
• 4 keystone pass-through ports: two on each side take standard snap-in keystone jacks or couplers (not included), for uplinks or devices that live elsewhere in the rack.
• Room for power: the Flex Mini version leaves 30 mm clear behind the switch for its rear USB-C plug. The Flex Mini 2.5G version leaves the front USB-C port open. Both switches can also run on PoE.
• Two halves, printed flat for strength: the halves slide together on a V tongue-and-groove, and your rack screws hold them in line. Add one optional M3 × 20 mm bolt and nut through the rear bosses (not included) to lock them into one rigid piece. Slots fit an optional 20 mm hook-and-loop strap (not included).
• Fits standard 10-inch racks: 254 mm (10 in) wide, 1U (44.45 mm) tall. Slotted rack holes (±2.5 mm) fit 236.5 mm (9.31 in) rail spacing and M6, M5 or 10-32 rack screws. Use the screws that came with your rack (not included).
• PETG, not PLA: stiff, and handles warm gear better than the PLA many printed mounts use.

Pick your version

• Flex Mini: compatible with UniFi Switch Flex Mini (USW-Flex-Mini), 107 × 70 × 21 mm. Mount depth 114 mm.
• Flex 2.5G: compatible with UniFi Switch Flex Mini 2.5G (USW-Flex-2.5G-5), 117.1 × 90 × 21.2 mm. Mount depth 110 mm.

Please check your switch's model number before ordering. The two versions are not interchangeable.

Fits or we reprint free

If it doesn't fit the model you ordered it for, message us within 30 days with a photo and we'll reprint it free, or refund you if you'd rather. No need to send anything back.

Printed to order in the USA

Printed to order in the USA by our print partner, in tough matte-black PETG. Ships in 3–5 business days, plus transit time.

In the box: left and right mount halves for the version you choose. Not included: the switch, keystone jacks or couplers, patch cables, rack screws, bolt, strap or any other hardware.

Shipping: $4.99, or free on orders of $69.99 or more. Contiguous US only (not Alaska, Hawaii or US territories).

Model names are used only to describe fit. This is an independent Neutrino Networks design. Not affiliated with or endorsed by Ubiquiti Inc. UniFi is a trademark of Ubiquiti Inc. Not made or endorsed by Ubiquiti.