{"title":"For UniFi","description":"\u003cp\u003e10-inch rack mounts and ears designed to fit popular UniFi gear. Neutrino Networks is not affiliated with Ubiquiti Inc.\u003c\/p\u003e","products":[{"product_id":"10-inch-rack-ears-lite-8-poe","title":"Neutrino 10-Inch 1U Rack Ears, compatible with UniFi Switch Lite 8 PoE","description":"\u003cp\u003e\u003cstrong\u003ePut your Lite 8 PoE in your 10-inch rack, ports facing front.\u003c\/strong\u003e These 1U ears are made for UniFi Switch Lite 8 PoE (USW-Lite-8-PoE), designed around its published dimensions. The switch rests on two support ledges, and every port, light and label on the front stays in full view.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible with UniFi Lite 8 PoE (USW-Lite-8-PoE):\u003c\/strong\u003e 163.7 × 99.6 × 31.7 mm. Designed with 1.25 mm clearance per side, and the rubber foot strips on the underside sit clear of the ledges.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCradle design, no drilling:\u003c\/strong\u003e each ear has a 70 mm deep support ledge, a side wall and a front stop lip, so it doesn't need screw holes in the switch (the Lite 8 has none). Two strap grooves take an optional 20 mm hook-and-loop strap (not included) to hold the switch in place.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRear stays clear:\u003c\/strong\u003e the switch extends about 30 mm behind the ears, so the power input on the back is free. Its external power adapter isn't held by the ears.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits standard 10-inch racks:\u003c\/strong\u003e 254 mm (10 in) wide, 1U (44.45 mm) tall. Slotted rack holes (±2.5 mm) fit 236.5 mm (9.31 in) rail spacing and M6, M5 or 10-32 rack screws. Use the screws that came with your rack (not included).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOne print, two ears:\u003c\/strong\u003e printed as one piece joined by a small snap-off link, so you snap them apart before fitting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePETG, not PLA:\u003c\/strong\u003e stiff, and holds up near warm network gear.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor 10-inch racks only; not for 19-inch racks.\u003c\/p\u003e\n\u003ch4\u003eFits or we reprint free\u003c\/h4\u003e\n\u003cp\u003eIf it doesn't fit the model you ordered it for, message us within 30 days with a photo and we'll reprint it free, or refund you if you'd rather. No need to send anything back.\u003c\/p\u003e\n\u003ch4\u003ePrinted to order in the USA\u003c\/h4\u003e\n\u003cp\u003ePrinted to order in the USA by our print partner, in tough matte-black PETG. Ships in 3–5 business days, plus transit time.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIn the box:\u003c\/strong\u003e 1 pair of rack ears (left and right, joined by a snap-off link). \u003cstrong\u003eNot included:\u003c\/strong\u003e the switch, rack screws, strap or any other hardware.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShipping:\u003c\/strong\u003e $4.99, or free on orders of $69.99 or more. Contiguous US only (not Alaska, Hawaii or US territories).\u003c\/p\u003e\n\u003cp\u003e\u003csmall\u003eModel names are used only to describe fit. This is an independent Neutrino Networks design. Not affiliated with or endorsed by Ubiquiti Inc. UniFi is a trademark of Ubiquiti Inc.Not made or endorsed by Ubiquiti.\u003c\/small\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Neutrino Networks","offers":[{"title":"Default Title","offer_id":51228358705399,"sku":"NN-3D-EAR-LITE8","price":24.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/6153\/1127\/files\/06_lite8poe_10in_ears.png?v=1790606430"},{"product_id":"10-inch-rack-mount-cloud-gateway","title":"Neutrino 10-Inch 1U Rack Mount with 2 Keystones, compatible with UniFi Cloud Gateway Ultra, Cloud Gateway Max, and Gateway Max","description":"\u003cp\u003e\u003cstrong\u003eGive your gateway a proper home in your 10-inch rack.\u003c\/strong\u003e This 1U mount is made for UniFi Cloud Gateway Ultra, Cloud Gateway Max and Gateway Max, designed around their published dimensions (all three share the same body). The gateway sits snug on raised rails behind the faceplate, with its display or status light facing out the front.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible with UniFi Cloud Gateway Ultra (UCG-Ultra), Cloud Gateway Max (UCG-Max) and Gateway Max (UXG-Max):\u003c\/strong\u003e 141.8 × 127.6 × 30 mm. Designed with 1.25 mm clearance per side, plus front stop lips sized for the gateway's rounded corners, so it can't slide out of the front.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2 keystone pass-through ports:\u003c\/strong\u003e these gateways have their network ports on the back. Snap in two standard keystone couplers or jacks (not included) and patch your WAN and a LAN port through to the front of the rack.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOpen where it matters:\u003c\/strong\u003e the rear is open for cables, power and the reset button. The top is open, and the sides are open along the lower edge where the UCG-Max has its vents and SSD door. We recommend leaving the gateway's stick-on feet off.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo halves, printed flat for strength:\u003c\/strong\u003e the halves slide together on a V tongue-and-groove, and your rack screws hold them in line. Add one optional M3 × 20 mm bolt and nut through the rear bosses (not included) to lock them into one rigid piece. Slots fit an optional 20 mm hook-and-loop strap (not included).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits standard 10-inch racks:\u003c\/strong\u003e 254 mm (10 in) wide, 1U (44.45 mm) tall. Slotted rack holes (±2.5 mm) fit 236.5 mm (9.31 in) rail spacing and M6, M5 or 10-32 rack screws. Use the screws that came with your rack (not included). Mount depth 148 mm, plus room for your cables.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePETG, not PLA:\u003c\/strong\u003e PETG handles warm equipment better than the PLA many printed mounts use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eFits or we reprint free\u003c\/h4\u003e\n\u003cp\u003eIf it doesn't fit the model you ordered it for, message us within 30 days with a photo and we'll reprint it free, or refund you if you'd rather. No need to send anything back.\u003c\/p\u003e\n\u003ch4\u003ePrinted to order in the USA\u003c\/h4\u003e\n\u003cp\u003ePrinted to order in the USA by our print partner, in tough matte-black PETG. Ships in 3–5 business days, plus transit time.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIn the box:\u003c\/strong\u003e left and right mount halves. \u003cstrong\u003eNot included:\u003c\/strong\u003e the gateway, keystone jacks or couplers, patch cables, rack screws, bolt, strap or any other hardware.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShipping:\u003c\/strong\u003e $4.99, or free on orders of $69.99 or more. Contiguous US only (not Alaska, Hawaii or US territories).\u003c\/p\u003e\n\u003cp\u003e\u003csmall\u003eModel names are used only to describe fit. This is an independent Neutrino Networks design. Not affiliated with or endorsed by Ubiquiti Inc. UniFi is a trademark of Ubiquiti Inc. Not made or endorsed by Ubiquiti.\u003c\/small\u003e\u003c\/p\u003e","brand":"Neutrino Networks","offers":[{"title":"Default Title","offer_id":51228358738167,"sku":"NN-3D-RM1U-GW2K","price":32.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/6153\/1127\/files\/01_ucg_ultra_max_10in_mount.png?v=1790606694"},{"product_id":"10-inch-rack-mount-flex-mini","title":"Neutrino 10-Inch 1U Rack Mount with 4 Keystones, compatible with UniFi Flex Mini and Flex Mini 2.5G","description":"\u003cp\u003e\u003cstrong\u003eTurn a Flex Mini into a tidy 1U patch point.\u003c\/strong\u003e This 10-inch rack mount for UniFi Flex Mini or Flex Mini 2.5G holds the switch on raised rails with all five ports facing out the front, and adds four keystone ports beside it. Each version is designed around the published dimensions of one switch, so pick the one that matches yours.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade for your switch:\u003c\/strong\u003e 1.25 mm clearance per side, support rails under both sides so it sits flat without rocking, and front stop lips so the switch can't slide out of the front. The power light and every port stay in view.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4 keystone pass-through ports:\u003c\/strong\u003e two on each side take standard snap-in keystone jacks or couplers (not included), for uplinks or devices that live elsewhere in the rack.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRoom for power:\u003c\/strong\u003e the Flex Mini version leaves 30 mm clear behind the switch for its rear USB-C plug. The Flex Mini 2.5G version leaves the front USB-C port open. Both switches can also run on PoE.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo halves, printed flat for strength:\u003c\/strong\u003e the halves slide together on a V tongue-and-groove, and your rack screws hold them in line. Add one optional M3 × 20 mm bolt and nut through the rear bosses (not included) to lock them into one rigid piece. Slots fit an optional 20 mm hook-and-loop strap (not included).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFits standard 10-inch racks:\u003c\/strong\u003e 254 mm (10 in) wide, 1U (44.45 mm) tall. Slotted rack holes (±2.5 mm) fit 236.5 mm (9.31 in) rail spacing and M6, M5 or 10-32 rack screws. Use the screws that came with your rack (not included).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePETG, not PLA:\u003c\/strong\u003e stiff, and handles warm gear better than the PLA many printed mounts use.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003ePick your version\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlex Mini\u003c\/strong\u003e: compatible with UniFi Switch Flex Mini (USW-Flex-Mini), 107 × 70 × 21 mm. Mount depth 114 mm.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlex 2.5G\u003c\/strong\u003e: compatible with UniFi Switch Flex Mini 2.5G (USW-Flex-2.5G-5), 117.1 × 90 × 21.2 mm. Mount depth 110 mm.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePlease check your switch's model number before ordering. The two versions are not interchangeable.\u003c\/p\u003e\n\u003ch4\u003eFits or we reprint free\u003c\/h4\u003e\n\u003cp\u003eIf it doesn't fit the model you ordered it for, message us within 30 days with a photo and we'll reprint it free, or refund you if you'd rather. No need to send anything back.\u003c\/p\u003e\n\u003ch4\u003ePrinted to order in the USA\u003c\/h4\u003e\n\u003cp\u003ePrinted to order in the USA by our print partner, in tough matte-black PETG. Ships in 3–5 business days, plus transit time.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIn the box:\u003c\/strong\u003e left and right mount halves for the version you choose. \u003cstrong\u003eNot included:\u003c\/strong\u003e the switch, keystone jacks or couplers, patch cables, rack screws, bolt, strap or any other hardware.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShipping:\u003c\/strong\u003e $4.99, or free on orders of $69.99 or more. Contiguous US only (not Alaska, Hawaii or US territories).\u003c\/p\u003e\n\u003cp\u003e\u003csmall\u003eModel names are used only to describe fit. This is an independent Neutrino Networks design. Not affiliated with or endorsed by Ubiquiti Inc. UniFi is a trademark of Ubiquiti Inc. Not made or endorsed by Ubiquiti.\u003c\/small\u003e\u003c\/p\u003e","brand":"Neutrino Networks","offers":[{"title":"Flex Mini","offer_id":51228358770935,"sku":"NN-3D-RM1U-FLEXMINI","price":28.99,"currency_code":"USD","in_stock":true},{"title":"Flex 2.5G","offer_id":51228358803703,"sku":"NN-3D-RM1U-FLEX25","price":28.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0957\/6153\/1127\/files\/03_flexmini_10in_mount.png?v=1790606830"}],"url":"https:\/\/shop.neutrinonetworks.net\/collections\/for-unifi.oembed","provider":"Neutrino Networks Shop","version":"1.0","type":"link"}